All Products

Double Sided PCB (17)

Multilayer PCB (17)

Aluminum PCB (20)

Flexible FPC (9)

Main/Mother Board PCB (2)

PCB Assembly (6)

Multilayer PCB (21)

PCB Assembly (3)

4 layer PCB (15)

6 layer PCB (10)

PCB Design (2)

Good quality and good price, our long-term cooperative supplier.

—— MOHAMMAD HOSSEIN SHAMS

The production speed is fast, the delivery date is punctual, the quality is stable, and the procurement process and cost are saved.

—— Tatiana Redina

I'm Online Chat Now

Printed Circuit Board Assembly Capabilities

HASCEND ELECTRONIC (HK) LIMITED Capabilities Introduction

HASCEND ELECTRONIC (HK) LIMITED Capabilities Introduction

Process Capability And Checking Parameters(Rigid PCB)
NO	ITEM	Technical Capabilities
1	Layers	1-38L
2	Max.Board Size	1200*610mm
		48"*24"
3	Finished Board Thickness	0.2mm--10.0mm
		0.008"--0.4"
4	Finished Copper Thickness	17um-420um
		0.5OZ--12OZ
5	Min.Trace Width/Space	0.075mm/0.065mm
		0.003"/0.0026"
6	Min.Hole Size	0.15mm
		0.006"
7	Hole Dim. Tolerance(PTH)	±0.05mm
		±0.002"
8	Hole Dim.Tolerance(NPTH)	±0.05mm
		±0.002"
9	Drill Location Tolerance	±0.05mm
		±0.002"
10	V-Cut Degrees	20-90 ºC
		20DEG-90DEG
11	Min.V-Cut PCB Thickness	0.4mm
		0.016"
12	N/C Routing Tolerance	±0.1mm
		±0.004"
13	Min.Blind/Buried Via	0.15mm
		0.06"
14	Plug Hole Size	0.2mm--0.6mm
		0.008"--0.024"
15	Min.BGA PAD	0.2mm
		0.008"
16	Materials	FR4(TG130-TG170),Aluminium,Halogen-free,Rogers,ShengYi,KB

17	Surface Finish	HASL-LF,ENIG,ImAg,ImSn,OSP,Gold platting, ENIG+OSP,HAL+G/F

18	Warp & Twist	≤0.75%

19	Electrical Testing	50--300V

20	Solderability Testing	245±5ºC,3sec Wetting area least95%

21	Thermal Cycling Testing	288±5ºC,10sec,3cycles

22	Ionic Contamination Testing	Pb,Hg,Cd,Cr(VI),PBB,PBDE six items are less than 1000ppm

23	Soldmask Adhesion Testing	260ºC+/-5, 10S,3times

Process Capability - Technical Parameters(FPC)
Content	Common	Special	Surface treatment	Thickness
Minimum line width	0.07mm	0.05mm	Electroplated nickel gold	Ni:3-9um;Au:0.03-0.1um
Minimum line spacing	0.07mm	0.05mm
Minimum Drilling aperture	Φ 0.15mm	Φ 0.1mm
Aperture Tolerance	±0.1mm	±0.05mm	Chemical immersion gold	Ni:3-5um;Au:0.03-0.1um
Maximum imposition size (single panel)	610mm*1200mm(Exposure limit)	250mm*35mm(only develop test samples)
Maximum imposition size (double panel)	610mm*1200mm(Exposure limit)	250mm*35mm(only develop test samples)
Maximum imposition size (single panel & double panel no PTH self-drying ink + UV light solid)	610*1650mm		Electroplated hard gold	Ni:2-9um;Au:0.1-0.3um
Finished board impedance tolerance	±10%		Electroplated pure tin	Sn:3-7um
Maximum production layer	12L
Thickness To Diameter Ratio	2:1(Minimum aperture 0.1mm)
	5:1(Minimum aperture 0.2mm)		Anti-oxidation
	8:1(Minimum aperture 0.3mm)
Monthly production capacity/m²	16000 m²

Material
Substrate Material	PI(0.5mil,1mil,2mil),PET(0.5mil,1mil)
Conductive Medium	Copper foil(1/3oz,1/2oz,1oz,2oz)
	Constantan
	Silver Paste
	Copper Ink
Adhesive	Epoxy resin, Acrylic, Adhesion
Solder Mask / Protective Film	PI(0.5mil,1mil,2mil)(Yellow, White, Black)
	PET(1mil,2mil)
	Solder mask (green, yellow, black...)
Glue	3M467,3M468,3M9077,TESA8853...
Reinforcement Type	PI,FR4,PET,Steel,Aluminum...

Contact Details

Shenzhen Hengxunda Circuit Technology Co.,LTD

Contact Person: Ms. angelina

Tel: 0086-15889447462

Fax: 86-755-23061612